Metal Damper Transforms your Pattern Cut Return Grille into an Adjustable Wall Register

This metal damper transforms your Pattern Cut wood return air grille into a decorative wood wall register. This metal damper adjusts the air flow in your wall register allowing your to keep it open, closed, or angled. These dampers come in 21 different sizes and are simple to use.

Tips for Ordering a Metal Damper for Your Wall Register

- Measure your duct opening (Width x Height).
- Match the duct opening size with the correct Pattern Cut grille size. (If your duct opening is 12 x 6, order the 12 x 6 grille)
- Then order the corresponding damper size. (In this example a 12 x 6 damper.) The metal dampers work with any of the Pattern Cut designs A - Z and is sold in the following sizes: 6 x 6, 8 x 4, 8 x 6, 8 x 8, 10 x 4, 10 x 6, 10 x 8, 10 x 10, 12 x 4, 12 x 6, 12 x 8, 12 x 10, 12 x 12, 14 x 4, 14 x 6, 14 x 8, 14 x 10, 14 x 12, 14 x 14, 16 x 6, and 16 x 8.

Metal Damper Installation Instruction

- Place the metal damper in the wall opening.
- Place Pattern Cut grille over the damper and screw into the wall.
- Adjust air flow with a screw driver, there is no need to disassemble to adjust.

***Please note: These dampers are intended for use with Pattern Cut Grilles only.

***Please note: These dampers are made to order and can take 3-5 weeks to make and ship. All decorative wall vents are considered special order, non returnable items and cannot be canceled once order is placed.